1. Use a cable stripper and strip the cable around the length of 2 inches.
2. Separate the cable according to colour codes. From left white/green ,green, white/orange, blue ,white/blue, orange ,white/brown and brown.
3. Straighten those pairs in straight line.
4. Use the crimping tools to cut excess wires so that RJ45 connector can fit.
5. Insert the cable carefully to the RJ45 connector and make sure all those pairs reach the end of the connector.
6. Crimp the wire using crimping tool.
7. Test the cable working using 2 computers or use cable tester.
2. Separate the cable according to colour codes. From left white/green ,green, white/orange, blue ,white/blue, orange ,white/brown and brown.
3. Straighten those pairs in straight line.
4. Use the crimping tools to cut excess wires so that RJ45 connector can fit.
5. Insert the cable carefully to the RJ45 connector and make sure all those pairs reach the end of the connector.
6. Crimp the wire using crimping tool.
7. Test the cable working using 2 computers or use cable tester.
Comments
Post a Comment